| ■Tokyo office-Chemical Analysis Center |
| Accreditation No.:RTL02600 |
| Date of Accreditation :2008-03-13 |
| Chemical testing |
| 1. Analytical test classified by products |
| 1-1． Appliance ･ Container packing ･ Toy |
| ISO 8124-3 8.1, EN 71-3 8.1 |
| Test object : |
| 1) Coating of paint 2)Varnish |
| 3) Lacquer 4) Printing ink |
| 5) Polymer and similar coating |
| ASTM F 963 4.3.5 |
| Test object : Paint and similar surface-coating materials |
| JIS K 0116 |
| Determination range : |
| Sb 5 mg/kg and over |
| As 2.5 mg/kg and over |
| Ba 50 mg/kg and over |
| Cd 5 mg/kg and over |
| Cr 5 mg/kg and over |
| Pb 5 mg/kg and over |
| Hg 5 mg/kg and over |
| Se 50 mg/kg and over |
| |
| 2． Hazardous substance analysis |
| 2-1. Resin, rubber |
| IEC 62321 8 |
| Standardization of measuring methods of specific trace metal |
| components in chemicals |
| （Japan Chemical Industry Association, March,2004） |
| CPSC-CH-E1002-08U |
| -Sealing system acid decomposition - high frequency plasma |
| atomic emission spectrometry(ICP-AES
method) |
| Cd 5 mg/kg and over |
| Cr 10 mg/kg and over |
| Pb 10 mg/kg and over |
| JIS K 0116 |
| Test object : |
| 1) Polyethylene |
| 2) Acrylonitrile / butadiene / styrene |
| 3) Polyester 4) Polypropylene |
| 5) Polyvinyl chloride 6) Acrylic |
| 7) Polyethylene terephthalate 8)
Silicon rubber |
| 9)Epoxy resin 10)Polyurethane |
| 11)Polymide 12)Polycarbonate |
| 13)Polyxymethylene |
| （Resin and rubber, verified by standard operation procedure to |
| verify additional test objects (MGSL-JAB/SOP/V-001)) |
| 2-2. Metal |
| IEC 62321 9 |
| CPSC-CH-E1001-08 |
| Pb 100 mg/kg and over |
| Decomposition method : Acid decomposition |
| Determination method : High frequency plasma
atomic emission spectrometry |
| JIS K 0116, ASTM E 1613 |
| Test object : |
| 1) Iron 2)
Stainless steel |
| 3) Copper and copper alloy
4) Aluminum and aluminum alloy |
| 5) Zinc and zinc alloy
6) Tin and tin alloy |
| (Metal, verified by standard operation
procedure to verify |
| additional test objects (MGSL-JAB/SOP/V-001)) |
| 2-3. Others |
| CPSC-CH-E1003-09 under 16 CFR Part1303 |
| ASTM E 1645 |
| Pb 10 mg/kg and over |
| Decomposition method : Sealing system acid decomposition |
| Determination method : High frequency plasma atomic emission |
| spectrometry (ICP-AES method) |
| JIS K 0116, ASTM E 1613 |
| Test object : |
| 1) Lacquer 2)
Urethane resin paint |
| 3) Acrylic resin paint
4) Vanish |
| 5) Silicon resin paint
6) Alkyd resin paint |
| 7) Polyester resin paint 8)
Vinyl chloride resin paint |
| 9)Epoxy resin paint |
| （Objects, verified by standard operation procedure to verify |
| additional test objects (MGSL-JAB/SOP/V-001)) |
| |
| ■Osaka office-Chemical Analysis Department |
| Accreditation No.:RTL02950 |
| Date of Accreditation :2009-09-01 |
| 1. Analytical test classified by products |
| 1-1. Glass (Ceramic) |
| JIS R 3503 6.2 |
| Quantity of alkali elution 0.010 ml/g (3.1 Na2Oug/g) and over |
| Determination method : Nuetralization titration |
| Test object : Glassware for chemical analysis |
| 1-2. Appliance ・ Container packing ・ Toy |
| -ISO 8124-3 |
| -EN71-3 |
| Test object : |
| -Paint and similar surface coating materials
in the toy |
| 1) Coatings of paint
2) Varnish |
| 3) Lacquer
4) Printing ink |
| 5) Polymer and similar coatings |
| - Polymeric and similar materials in the toy (including |
| laminates, whether reinforced textile or not, but excluding other textiles) |
| -ASTM F 963 |
| -Paint and similar surface coating materials in the toy |
| 1) Coatings of paint
2) Varnish |
| 3) Lacquer
4) Printing ink |
| 5) Polymer and similar coatings |
| |
| Sb 5 mg/kg
and over As
2.5 mg/kg and over |
| Ba 50 mg/kg
and over Cd
5 mg/kg and over |
| Cr 5 mg/kg
and over Pb
5 mg/kg and ove |
| Hg 5 mg/kg
and over Se
50 mg/kg and ove |
| Elution method : 0.07 mol/L Hydrochloric acid elution |
| Determination method : Inductively
coupled plasma atomic emission spectrometry |
| JIS K 0116 |
| 2. Hazardous substance analysis |
| 2-1. Others |
| CPSC-CH-E1003-09 based on 16 CFR Part130 |
| Pb 10 mg/kg and over |
| Digestion method : Closed vessels system microwave-assisted acid digestion |
| Determination method : Inductively
coupled plasma atomic emission spectrometry |
| JIS K 0116,ASTM E 1613 |
| Test object : |
| -Paint and similar surface coating materials |
| 1)Aqueous acrylic lacquer |
| |
| ISO/IEC 17025 (JIS Q 17025)−”General Requirements for the competence
of testing |
| and calibration laboratories” specifies
technical requirements for competence of a laboratory |
| to conduct specific test/calibrations as
well as the requirements for management system. |
| Demonstration of technical competence includes
ensuring measurement traceability |
| (including the estimation of measurement
uncertainty), and successful participation |
| in proficiency testing programs or inter-laboratory
comparison. |
| An accredited laboratory has a right to issue
test reports that bear the symbol mark |
| of the accreditation body such as JAB symbol
or logo mark. Moreover, since JAB is a |
| signatory to ILAC/MRA (Mutual Recognition
Arrangement of International Laboratory |
| Accreditation Cooperation), the test report
issued by an accredited testing laboratory,
such |
| as MGSL, shall be acceptable worldwide
in many cases. |
